LACP

Konfigurasi LACP

Link Aggregation Control Protocol (LACP) merupakan protokol standar (IEEE 802.3ad/802.1AX) yang digunakan untuk mengontrol beberapa port fisik menjadi satu logical channel.

Berikut contoh configurasi LACP  pada :

1. Switch Cisco Catalyst (IOS)
   

   interface Port-channel1
   description “Connection to …”
   switchport trunk encapsulation dot1q
   switchport trunk allowed vlan 1,10
   switchport mode trunk
   end

   interface GigabitEthernet1/0/1
   switchport trunk encapsulation dot1q
   switchport trunk allowed vlan 1,10
   switchport mode trunk
   channel-protocol lacp
   channel-group 1 mode active
   end

   interface GigabitEthernet1/0/2
   switchport trunk encapsulation dot1q
   switchport trunk allowed vlan 1,10
   switchport mode trunk
   channel-protocol lacp
   channel-group 1 mode active
   end

2. Switch Juniper EX Series (JUNOS)
   

   set chassis aggregated-devices ethernet device-count 1
   set interfaces ge-0/0/0 ether-options 802.3ad ae0
   set interfaces ge-0/0/1 ether-options 802.3ad ae0
   set interfaces ae0 description “Connection to …”
   set interfaces ae0 aggregated-ether-options lacp active
   set interfaces ae0 unit 0 family ethernet-switching port-mode trunk
   set interfaces ae0 unit 0 family ethernet-switching vlan members user_vlan
   set interfaces ae0 unit 0 family ethernet-switching native-vlan-id 1

3. Switch Alcatel-Lucent OmniSwitch (AOS)
   

   lacp linkagg 1 size 2 actor admin key 5
   lacp agg 1/1 actor admin key 5
   lacp agg 1/2 actor admin key 5
   interface 1 alias “Connection to …”
   vlan 1 port default 1
   vlan 10 802.1q 1

4. Linux
   

   modprobe bonding mode=802.3ad miimon=100
   modprobe 8021q
   ifenslave bond0 eth0 eth1
   vconfig add bond0 10
   ifconfig bond0 192.168.1.10 netmask 255.255.255.0
   ifconfig bond0.10 192.168.10.10 netmask 255.255.255.0

Edit :
1. Menambahkan contoh konfigurasi di Linux