KONTROL LED BERBASIS WEBSITE DENGAN ARDUINO + ETHERNET ENC28J60
https://boardinnovation.wordpress.com/2016/05/15/kontrol-led-berbasis-website-dengan-arduino-ethernet-enc28j60/
Hi Sobat BI,
Kehadiran IoT (Internet of Things) menuntut semua perangkat (devices) untuk bisa terkonek ke internet. Terdapat beberapa pilihan agar kita bisa terkonek ke internet jika dipandang dari Layer 1 OSI physical layer, yaitu wired dan wireless. Pada kesempatan ini, kami akan memberikan tutorial agar devices kita (Arduino) bisa terkonek ke jaringan secara wired atau kabel.
ALAT DAN KOMPONEN
- Arduino (dalam tutorial ini Mega)
- Ethernet Board ENC28J60
- Kabel Jumper
- Kabel RJ45
SKEMATIK
ANTARMUKA
| ENC28J60 | Arduino Uno | Arduino Mega |
| VCC | +5 Volt | +5 Volt |
| GND | GND | GND |
| SCK | Pin 13 | Pin 52 |
| SO (MISO) | Pin 12 | Pin 50 |
| SI (MOSI) | Pin 11 | Pin 51 |
| CS | Pin 8 | Pin 53 |
Library
SOURCE CODE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
| #include <UIPEthernet.h>EthernetServer server = EthernetServer(80);//inisialisasi variableint led = 13;String readString;boolean ledStatus = false;void setup() { // put your setup code here, to run once: pinMode(led, OUTPUT); Serial.begin(9600); uint8_t mac[6] = {0x00,0x01,0x02,0x03,0x04,0x05}; IPAddress myIP(192,168,3,1); Ethernet.begin(mac,myIP); server.begin(); }void loop() { if(ledStatus == true){ digitalWrite(led, HIGH); } else{ digitalWrite(led, LOW); } // Create a client connection EthernetClient client = server.available(); if (client) { while (client.connected()) { if (client.available()) { char c = client.read(); //read char by char HTTP request if (readString.length() < 100) { //store characters to string readString += c; //Serial.print(c); } //if HTTP request has ended if (c == '\n') { Serial.println(readString); //print to serial monitor for debuging client.println("HTTP/1.1 200 OK"); //send new page client.println("Content-Type: text/html"); client.println(); client.println("<HTML>"); client.println("<HEAD>"); client.println("<meta name='apple-mobile-web-app-capable' content='yes' />"); client.println("<meta name='apple-mobile-web-app-status-bar-style' content='black-translucent' />"); client.println("<link rel='stylesheet' type='text/css' href='http://randomnerdtutorials.com/ethernetcss.css' />"); client.println("<TITLE>BOARD INNOVATION</TITLE>"); client.println("</HEAD>"); client.println("<BODY>"); client.println("<H1>BOARD INNOVATION LED Controller</H1>"); client.println("<H2>LED STATUS</H2>"); if(ledStatus==true){ client.println("<H3>IT IS ON</H3>"); } else{ client.println("<H3>IT IS OFF</H3>"); } client.println("<br />"); client.println("<br />"); client.println("<H2>PANEL CONTROL</H2>"); client.println("<a href=\"/?LEDon\"\">Turn On LED</a>"); client.println("<a href=\"/?LEDoff\"\">Turn Off LED</a><br />"); client.println("<br />"); client.println("<br />"); client.println("<p>Modified by FARIZ ALEMUDA</p>"); client.println("<br />"); client.println("</BODY>"); client.println("</HTML>"); delay(1); //stopping client client.stop(); //controls the Arduino if you press the buttons if (readString.indexOf("?LEDon") >0){ ledStatus = true; } if (readString.indexOf("?LEDoff") >0){ ledStatus = false; } //clearing string for next read readString=""; } } }}} |
VIDEO TUTORIAL
Iklan
